
Using 3 d hot bending glass heat pipes need to be pay attention to? Its safety performance
In the industry, the application of 3D hot bending glass heat pipes more and more, it has a very big role on industrialization, so the safety performance of the electric heating tube? For safety problem has always been the user can't ignore, also, they are extremely concerned about that in use process need what to problem note?
In industry, often used in 3D hot bending glass heat pipes, are generally adopts the core grinding equipment, and pipe diameter is very standardized, mainly in order to better cooperate with various equipment connection, so the design is very reasonable, and high thermal effect, coupled with advanced production technology, so the performance will be extremely outstanding, which will greatly improve the life of the equipment, so that users can rest assured use. In real life, there are countless cases showed us that the good performance of the heating tube, in use process as long as master the right method, combined with good daily maintenance and maintenance, so the basic won't have a big problem.
Factory production and sales of electric heat pipe for specification, basic it is in accordance with the relevant national standard production, can satisfy the use requirements of most of the equipment, but want to make sure that safety when using, then according to standard operation. In general in addition to the matters that should pay attention to some, but also to ensure that the relative humidity of the air in the work environment is not too big, also can not be used in flammable and corrosive liquid, at the same time, constant pressure is not greater than 1.1 times rated voltage of the above, the shell to effective grounding, etc., only registered these matters, plus regular maintenance, maintenance records, so can not only increase the safety of the equipment performance, but also can prolong the service life of equipment.
Using 3D hot bending glass heat pipes to pay attention to what?
First, pay attention to the liquid can't get on the heating pipe joint, in order to avoid electric shock accidents caused by the leakage; Secondly, joint to clean, not dry, otherwise easy to burn out equipment; Then, when the heating liquid, liquid than heating surface, heating tube is not able to come to light; Finally, when using the voltage should be within the rated current, cannot be too high or too low, otherwise the security cannot be guaranteed.